9841434888 / 9380645502 Our Clients | FAQS


Click the below Applications list to see it in Detail:

Shrink-fitting is a technique in which an interference fit is achieved by a relative size change after assembly. This is usually achieved by heating or cooling one component before assembly and allowing it to return to the ambient temperature after assembly, employing the phenomenon of thermal expansion to make a joint.
Adhesive bonding in industrial production often requires very short curing times. In case of reactive adhesives, this generally means high curing temperatures.
Induction melting furnaces are designed for maximum electrical efficiency using heavy walled, high electrically conductive copper tubing.
Soldering and Brazing are joining processes where materials, similar or dissimilar, are bonded together using a heating method and a filler metal without melting the base materials. The filler metal melts, wets the base materials, and subsequently flows by capillary action.
Varnish finishes are usually glossy but may be designed to produce satin or semi-gloss sheens by the addition of "flatting" agents.
Hardening is a metallurgical and metalworking process used to increase the hardness of a metal. The hardness of a metal is directly proportional to the uniaxial yield stress at the location of the imposed strain. A harder metal will have a higher resistance to plastic deformation than a less hard metal.
Forging is a manufacturing process involving the shaping of metal using localized compressive forces. The blows are delivered with a hammer (often a power hammer) or a die.
Annealing is a heat process whereby a metal is heated to a specific temperature /colour and then allowed to cool slowly. This softens the metal which means it can be cut and shaped more easily. Mild steel, is heated to a red heat and allowed to cool slowly.
Ferrous and non-ferrous foundries specialize in melting and casting metal into desired shapes.
Brazing is a metal-joining process in which two or more metal items are joined together by melting and flowing a filler metal into the joint, the filler metal having a lower melting point than the adjoining metal.
A heat pipe is a heat-transfer device that combines the principles of both thermal conductivity and phase transition to efficiently manage the transfer of heat between two solid interfaces.